
ROCCA Pallet Fork RXPG080 for excavators up to 10 t – up to 2.5 t load capacity, incl. fork tines and mounting
ROCCA® Pallet Fork for Excavators up to 10 t
The ROCCA® pallet fork turns your excavator into a fully fledged transport machine on the construction site: unloading pallets, moving stone packs, relocating material — without having to bring in a second vehicle. Designed for carrier machines up to 10 t, with a load capacity of up to 2.5 t.
This is included in the scope of delivery
- Fork carriage — the base frame with tine suspension
- 2 × fork tines — already included, not an extra accessory
- 1 × mounting of your choice — you select it directly when ordering
📸 Note on the product image
The two fork tines are not shown in the illustration but are included in the scope of delivery. You receive the complete unit: fork carriage, two tines, one mounting.
One bolt pattern. Every mounting. Every machine.
All ROCCA mountings have the same bolt pattern (RL10 system). This means you can order a second or third mounting at any time and run the same pallet fork on several machines with different quick coupler systems. One attachment, several excavators — instead of a separate one for each machine.
This applies to the entire bolted ROCCA range: the mountings also fit the sweeper broom, grading beam and grading roller. If you have several ROCCA attachments in your fleet, you swap the mounting instead of buying every attachment twice.
💡 Particularly interesting for rental fleets
Attachments that are rarely used only pay off if they can be used across the entire fleet. With RL10, you tie up significantly less capital in attachments without losing flexibility.
FAQ – frequently asked questions
Are the fork tines really included in the scope of delivery?
Which mountings are available?
Can I use the pallet fork on several excavators?
Do the mountings also fit other ROCCA attachments?
👉 Configure and order your ROCCA® pallet fork now!
| Recording | MS03, MS08, OQ45, OQ60 |
