Directly to the content
Mechanic SChnell changer, Hydraulic SChnell changer or SyMlock.
But what are the differences here? And are these systems compatible with each other?
COMPATIBILITY
The designation SW03 only refers to the size of the quick changer. An MS SW03-quick changer is therefore a mechanical quick changer with size 03. An HS SW08-Schnellwechser, on the other hand, is a hydraulic quick changer with size 08.
Basically, the different systems are compatible with the same size. That means if you have a MS03-bucket you can not only record it with your MS03 quick changer, but also with your HS03 quick changer.
However, do you have a MS08-bucket, Can't you record it with any of the speed changers listed beforehand, since you need an MS / HS08 quick changer here.
The same applies to bucket With SyMlock recording. A bucket With a SY03 adapter, a MS03 and an HS03-speed changer is compatible. The addition SY simply stands for fastening in both directions. The bucket Has 2 recording poles and no "perforated plate" through which the locking bolts carry out. Instead, through a technically advanced construction, both bolts of the recording were made so that the bucket can be used as a deep and high spoon. The high-speed changer is crucial for compatibility here: For a SY08 adapter you need an MS08 or HS08 speed changer.
Symptom
The Symptom is particularly suitable for one Digging bucket to use as high spoon. You can absorb and fasten your cultivation tool in both directions through the symmetrically arranged waves. With that you can "spoon", i.e. the excavator spoon as Digging bucket Use or "spoon away from yourself", i.e. use the excavator spoon as a high spoon.
Here is a list of deep spoons with symptoms with symptoms:
- Lehnhoff sy01 Digging bucket For 1.0 to 1.9 tons
- Lehnhoff sy03 Digging bucket For 2.0 to 2.5 tons
- Lehnhoff sy03 Digging bucket For 2.6 to 3.5 tons
- Lehnhoff sy03 Digging bucket For 3.6 to 5.0 tons
- Lehnhoff sy03 Digging bucket For 5.1 to 6.0 tons
- Lehnhoff sy08 Digging bucket For 6.1 to 8.0 tons
- Example product for SY08 Digging bucket 8.1 to 10 tons
- Example product for SY08 Digging bucket 10 to 12 tons
Mechanical speed changer
A mechanical Lehnhoff speed changer is mechanical to use - by hand. You have to get the lock by hand to attach or remove an attachment device Steck key or close. The two bolt bolts are from the speed changer to the Lehnhoff recording on bucket driven.
Examples of this are:
- Lehnhoff MS SW01 for 0.5 to 1.9 tons
- Lehnhoff MS SW03 for 2.0 to 6.0 tons
- Lehnhoff MS SW08 for 6.1 to 12 tons
Hydraulic speed changer
With hydraulic speed changer, getting out of the cabin is not necessary. Here the quick changer is driven via the cultivation tool and a button/ switch is made in the cabin, which automatically extends the bar bolt.
Important: You have to hydraulic growing device (Swinging spoon, hammer, etc.) Connect the hoses by hand. The hydraulic quick changer attaches the attachment, but does not connect it. A fully hydraulic quick changer is then planned for this.